TIMING BELTS OF THE Optibelt OMEGA SERIES ARE OPTIMISED FOR USE IN SYNCHRONOUS POWER AND POSITIONING DRIVES. Since their geometry has been matched to the common rounded pulleys, they are not only universally applicable, but also work maintenance-free without speed loss and with a constant transmission ratio, while at the same time running very quietly. While the Optibelt OMEGA standard belt meets medium power requirements for slow and fast running drives, the Optibelt OMEGA HP is the best choice for extremely heavily loaded, fast running drives. It is not only narrower, which reduces the bearing load and further reduces material costs for the drive implementation, but also achieves a performance level that is up to 150 percent higher than that of a standard belt in a direct comparison with it.

The enhanced profile of the Optibelt OMEGA 2in1 fits perfectly with HTD and RPP drive pulleys with 3, 5, 8 and 14 mm gaps. The Optibelt OMEGA 2in1 is the logical further development of round and curved tooth profiles. With an efficiency of 98 %, the Optibelt OMEGA 2in1 combines maximum economy with optimum power transmission. Its special profile is compatible with HTD and RPP drive pulleys. That is: One drive belt covers both pulley types perfectly – without any double stockholding. And thanks to the special tooth profile, it is audibly quieter than other timing belts.